SPC Performance 0 deg. 4X4 Camber/Caster Sleeve

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install a zero degree sleeve 23139 to determine the change needed ,then install the correct sleeve.To split camber and caster adjustment, rotate sleeve 45deg. California Residents WARNING Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

• Easily change caster / camber or both at the same time
• Front Adjustment Range: Camber/Caster ±0.00°
• Front Adjustment Range: Camber/Caster ±0.00˚
• Clear Zinc coating for corrosion resistance
• Recommended Tools: 77880 - Sleeve Puller
• Required: 1 per wheel