Edelbrock Perf Plus Cam and Lifters Kit Chrys 383-440

Edelbrock part #2192 Performer-Plus camshaft is designed for 1968 and later big-block Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 427 ft-lbs. of torque when used with #2191 intake and stock iron cylinder heads on a 440 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees - Lift @ Valve Intake: .420" - Lift @ Valve Exhaust: .442" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 14" Edelbrock part #2192 Performer-Plus camshaft is designed for big-block Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 427 ft-lbs. of torque when used with #2191 intake and stock iron cylinder heads on a 440 engine. Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L)

• Take the Guesswork Out of Camshaft Selection!