DEI Versa-Shield (Starter Shield) 7in x 2ft Universal Heat Shield

Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000°F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield. Versa Heat Shield™; 7 in. x 24 in.; Smaller Retail Package; Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield. Universal

• Withstands 500 Degrees F Of Direct Heat/2000 Degrees Radiant
• Protect Master Cylinders/Cool Cans/Distributor /Fuel Pumps
• Edges Attach To Itself With Hook And Loop Closure Design
• No Need To Remove Starter For Installation In Most Cases
• Can Easily Be Removed For Shows
• Universal-Trim Length To Size
• 7 in. Wide x 24 in. Long