APR 15-19 Volkswagen Golf R (MK7 GTI/R) Lowering Springs - Red

These springs were designed in house and manufactured in the USA using a premium high tensile chrome silicon steel for excellent resilience against sagging and failure for years to come. Each spring comes powder coated in our signature red color, further protecting the spring from the elements. The front and rear springs are a dual rate spring that will operate as a single rate, linear spring, under normal loaded driving situations. All center of wheel to fender (CF) measurements were recorded on our in-house US Spec 2017 MK7 GTI (Non-DCC), US Spec 2018 MK7.5 GTI (DCC), and US Spec 2018 MK7.5 Golf R (DCC) test vehicles and may vary slightly from vehicle to vehicle. Lastly, while this system was designed specifically for the MK7 / MK7.5 GTI, it will fit other similar platform vehicles. Fits Volkswagen Golf R 15-19, GTI 15-21 All center of wheel to fender (CF) measurements were recorded on our in-house US Spec 2017 MK7 GTI (Non-DCC), US Spec 2018 MK7.5 GTI (DCC), and US Spec 2019 MK7.5 Golf R (DCC) test vehicles and may vary slightly from vehicle to vehicle. Lastly, while this system was designed specifically for the MK7 / MK7.5 GTI and Golf R, it will fit other similar platform vehicles.

• Increases Spring Rate 50% or +107 lbs/in at 323 lbs/in Front / 48% or +117 lbs/in at 362 lbs/in Rear (MK7.5 Golf R DCC)
• Increases Spring Rate 76% or +139 lbs/in at 323 lbs/in Front / 45% or +112 lbs/in at 362 lbs/in Rear (MK7 GTI Non-DCC)
• Increases Spring Rate 50% or +108 lbs/in at 323 lbs/in Front / 60% or +136 lbs/in at 362 lbs/in Rear (MK7.5 GTI DCC)
• Made from a high tensile chrome silicon steel that resists sagging and failure
• Lowers 18 mm or 0.71 in Front / 32 mm or 1.26 in Rear (MK7 GTI Non-DCC)
• Lowers 5 mm or 0.20 in Front / 22 mm or 0.87 in Rear (MK7.5 Golf R DCC)
• Does not constantly compress or ride on the OEM progressive bump stops
• Lowers 22 mm or 0.87 in Front / 37 mm or 1.46 in Rear MK7.5 GTI DCC)
• Operates as a single rate “linear” spring during loaded usage
• Powder coated red finish protects springs from corrosion
• Dual Rate Spring (185 lbs/in to 323 lbs/in Front)
• Designed for use with DCC and Non-DCC OEM dampers
• Dual Rate Spring (155 lbs/in to 362 lbs/in Rear)
• Greatly improves vehicles stance and appearance
• Lowers the vehicle’s center of gravity
• Does not easily bottom out dampers
• Remains comfortable on the street
• Direct plug-and-play
• Reduces body roll
• Improves handling
• Made in the USA