SPC Performance

With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530)...

With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to 1.0 camber change and up to .50...

Adjust rear toe on Honda Accord and Acura TL models with this fully adjustable control arm from SPC. This remove and replace arm provides +-3.0deg of adjustment and allows the installer to easily...

Replace corroded or damaged OE toe cam bolts on the rear of may late model Porsche vehicles with this replacement cam kit from SPC. This cam kit is designed to replace the factory adjusters and...

Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to 2 camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability...

Used on any brake lathe and with any ventilated rotor, they suppress vibration and noise. Segmented silencer is made of the finest latex rubber tubing with four (4) steel tubes to quiet chatter...

These 9" steel adjusting sleeves are the perfect fit with our pivot studs and ball joint plates. California Residents WARNING Product appearance and features may vary in the market as design changes,...

A perfect complement to SPC adjustable upper control arms, these lower arms drop the front end by 1" and feature 1 degree positive caster for a ready-to-run, aggressive stance on many popular '64-'72...

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to...

Use this sliding balljoint to adjust camber on the rear of the Acura MDX for improved handling and tire wear. The OE quality balljoint is easily installed and corrects camber angles +-3deg...

Adjustable Upper Control Arm with 5" adjusting sleeves, 0deg GM Midsize Metric ball joint plate and rod ends for mounting to vehicle. California Residents WARNING Product appearance and features may...