Edelbrock part #8087 is a -6AN x 5/8"-20 Fuel Inlet Fitting for Edelbrock Square-Bore & Carter AFB Carbs. This fuel inlet fitting is designed to replace the EPS carburetor's existing fuel inlet...

Edelbrock part #7281 Exhaust Gaskets are designed for 1961-79 Pontiac 326-389-400-421-428-455 V8 engines. These Exhaust Gaskets are made of EnCore HTX-900; a high-density non-asbestos fiber/metal...

Edelbrock Exhaust Header Bolt Kit #8545 contains a set of 12 high-quality black oxide steel flanged bolts for universal applications that require a 3/8-16 thread pitch and 1-inch length. These header...

Edelbrock Exhaust Header Bolt Kit #8540 contains a set of 12 high-quality black oxide steel flanged bolts for universal applications that require a 3/8-16 thread pitch and 3/4-inch length. These...

Edelbrock Exhaust Header Bolt Kit #8543 contains a set of 12 high-quality black oxide steel flanged bolts for universal applications that require a M8-1.25 thread pitch and 25mm length. These header...

The Edelbrock #93663 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32" except where noted. The...

The Edelbrock #9719 Intake Valve Seat is a replacement for Edelbrock cylinder heads. The Edelbrock #9719 Exhaust Valve Seat is a Replacement for Edelbrock Ford FE Cylinder Heads with 1.66" Exhaust...

The Edelbrock #93664 Exhaust Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32" except where noted...

Edelbrock Fuel Pressure Regulator kit #35631 features a unique design that allows it to be mounted directly to the EZ Street TBI body fuel inlet which eliminates the hassle of locating a mounting...

Engineered to provide an affordable and user-friendly upgrade for any V8 engine originally equipped with a carburetor, the EZ-Street EFI system seamlessly integrates cutting-edge technology with...

Edelbrock part #3577 Regulator Fitting is a -6 AN fuel inlet fitting is for use with fuel mounted regulators that come included with all Pro-Flo EFI systems. The fitting will screw directly onto the...

Edelbrock part #8080 Brass Hose Fitting is a 1/4-18" NPT fitting with a 3/8" barb. This Fitting will fit the rear vacuum port of all Edelbrock four-barrel carbs. FITTING 3/8in. BARB x 1/4in. NPT MALE...